TM 5-3805-261-20
ENGINE MAINTENANCE. (cont)
6-9.
Valve Cover Breather. (Sheet 3 of 3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install new preformed packing (10) and
breather (9, Figure on valve cover.
2.
Install breather (9) on valve cover.
3.
Install washer (8) and bolt (7) loosely.
4.
Install hose (6) on breather (9, Figure
6-20).
5.
Install two clamps (5), but do not
tighten.
6.
Install tube (4) in hose (6).
7.
Install clip (3), two washers (2) and bolt
(1) in front, left side of engine.
8.
Tighten two clamps (5) to top, front of
engine.
9.
Tighten bolt (7) to 12 ft-lb torque.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 6-21.
Figure 6-20.
End of Task
6-30
