TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-28.
Centershift Lines, Fittings and Hoses. (Sheet 7 of 7)
INSTALLATION
12.
Install two new preformed packings (2) and
elbows (1, Figure 15-122) to right control
valve group.
13.
Connect two hose assemblies (9, Figure
15-121) to right control valve group.
14.
Connect two hose assemblies. Refer to
paragraph 15-29, steps 16 and 17.
WARNING
Only
a
qualified
operator
may
perform the next procedure. All other
personnel must clear the immediate
area. Failure to follow this procedure
may cause INJURY. If you are
injured,
seek
medical
aid
immediately.
15.
Start engine. Refer to TM 5-3805-261-10.
16.
Stop engine.
17.
Inspect hose assemblies and connections
for leaks.
18.
Refill hydraulic tank to proper level. Refer
to LO 5-3805-261-12.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 15-122.
Figure 15-121.
End of Task
15-155
