TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-28.
Centershift Lines, Fittings and Hoses. (Sheet 4 of 7)
REMOVAL (cont)
10.
Remove bolt (26), washer (27) and clamp
(28, Figure 15-129).
11.
Remove bolt (29), washer (30) and two
clips (31, Figure 15-130).
12.
Remove nut (32), two clips (33), washer
(34) and bolt (35).
13.
Remove hose assembly (36), elbow (37)
and preformed packing (38) from bottom of
centershift cylinder. Discard preformed
packing (38).
14.
Remove hose assembly (39), connector
(40) and preformed packing (41, Figure 15-
131)
from
top
of
centershift
cylinder.
Discard preformed packing (41).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install
new
preformed
packing
(41),
connector (40) and hose assembly (39,
Figure 15-131) to top of centershift cylinder.
Figure 15-129.
Figure 15-130.
Figure 15-131.
Go to Sheet 5
15-152
