TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-28.
Centershift Lines, Fittings and Hoses. (Sheet 2 of 7)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends to prevent contamination.
1.
Disconnect two hose assemblies. Refer to
paragraph 15-29, steps 1 and 2.
2.
Disconnect two hose assemblies (9, Figure
15-121) from right control valve group.
3.
Remove two elbows (1) and preformed
packings (2, Figure 15-122).
4.
Remove two bolts (3), washers (4) and
clamps (5, Figure 15-123).
5.
Remove two bolts (6), washers (7) and
clamps (8, Figure 15-124).
Figure 15-123.
Figure 15-121.
Figure 15-122.
Figure 15-124.
Go to Sheet 3
15-150