TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-29.
Articulation Lines, Fittings and Hoses. (Sheet 2 of 7)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect hose assemblies (5 and 6,
Figure 15-132) from right control valve
group (inner most valve) under right side of
cab.
2.
Remove elbow (1), preformed packing (2),
elbow (3) and preformed packing (4).
Discard preformed packings (2 and 4).
3.
Remove hose assemblies (5 and 6) from
articulation check valve (45).
4.
Remove elbow (7), preformed packing (8),
elbow (9) and preformed packing (10).
Discard preformed packings (8 and 10).
Figure 15-132.
Go to Sheet 3
15-157