TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-22.
Hydraulic Pump Assembly, Junction Block and Steering Control Valve Lines. (Sheet 10 of 10)
INSTALLATION (cont)
22.
Install new preformed packing (9) and
elbow (8, Figure 15-67).
23.
Connect hose assembly (10) to steering
control valve.
24.
Install new preformed packing (7).
25.
Install hose assembly (6).
26.
Install two flange halves (5).
27.
Install four washers (4) and bolts (3).
28.
Install new preformed packing (2) and
connector (1).
29.
Connect hose assembly (6) to steering
control valve.
30.
Start engine. Refer to TM 5-3805-261-10.
31.
Turn steering wheel. Move wheels back
and forth at least five times to bleed air from
the system.
32.
Stop engine.
33.
Check hydraulic pump, junction block and
steering control valve connections for leaks.
34.
Fill hydraulic tank to proper level. Refer to
LO 5-3805-261-12.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 15-67.
End of Task
15-110