TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-22.
Hydraulic Pump Assembly, Junction Block and Steering Control Valve Lines. (Sheet 8 of 10)
INSTALLATION (cont)
7.
Install washers (43) and (44) and bolt (42,
Figure 15-72).
8.
Install washer (37), washer (36)clamp (35)
and bolt (34) to junction block,
9.
Connect hose assemblies (28 and 27).
10.
Install new preformed packing (26) and
connector (25, Figure 15-70).
11.
Connect tube assembly (24) to junction
block.
12.
Install clamp (23), hose (22) an clamp (21).
13.
Tighten clamps (23 and 21).
14.
Install new preformed packing (20) and
connector (19).
15.
Connect tube assembly (18) on hydraulic
pump assembly.
Figure 15-70.
Figure 15-71.
Go to Sheet 9
15-108