TM 5-3805-293-23-5
0321
INSTALLATION CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury to personnel.
16. Install vacuum cap (WP 0221).
17. Relieve hydraulic system pressure on circle drive circuit (WP 0218).
18. Connect two hydraulic hoses (Figure 10, Item 1) to circle drive swivel (Figure 10, Item 2).
19. Remove vacuum cap (WP 0221).
20. Install four clamps (Figure 10, Item 6), washers (Figure 10, Item 5), and bolts (Figure 10, Item 4) on hydraulic
hoses (Figure 10, Item 3).
Figure 10. Hydraulic Hose at Circle Drive Swivel Installation.
0321
21. Install blade tip cylinder (WP 0311).
END OF TASK
FOLLOW-ON TASKS
000321
1. Remove articulation lock pin (TM 5-3805-293-10).
2. Check hydraulic fluid level (WP 0217).
END OF TASK
END OF WORK PACKAGE
