TM 5-3805-293-23-5
0313
DISASSEMBLY
000313
1. Loosen head (Figure 5, Item 1) and remove centershift cylinder rod (Figure 5, Item 13) from centershift cylinder
housing (Figure 5, Item 7).
2. Remove bolt (Figure 5, Item 9) and washer (Figure 5, Item 10) from centershift cylinder rod (Figure 5, Item 13).
3. Remove piston (Figure 5, Item 8) and head (Figure 5, Item 1) from centershift cylinder rod (Figure 5, Item 13).
4. Remove wear ring (Figure 5, Item 12) and seal (Figure 5, Item 11) from piston (Figure 5, Item 8). Discard seal
and wear ring.
5. Remove O-ring (Figure 5, Item 3), backup ring (Figure 5, Item 14), wiper seal (Figure 5, Item 2), U-cup seal
(Figure 5, Item 4), buffer seal (Figure 5, Item 5), and wear ring (Figure 5, Item 6) from head (Figure 5, Item 1).
Discard O-ring, backup ring, wiper seal, U-cup seal, buffer seal, and wear ring.
Figure 5. Cylinder.
0313
END OF TASK
CLEANING AND INSPECTION
000313
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
