TM 5-3805-293-23-5
0309
INSTALLATION CONTINUED
5. Install two caps (Figure 8, Item 11), four washers (Figure 8, Item 9), and bolts (Figure 8, Item 10) on cylinder
(Figure 8, Item 12).
6. Remove sling and lifting device from cylinder (Figure 8, Item 12).
7. Install clamp (Figure 8, Item 8), two washers (Figure 8, Item 2), spacer (Figure 8, Item 3), and bolt (Figure 8,
Item 1) on cylinder (Figure 8, Item 12).
8. Install hose clamps (Figure 8, Items 4 and 5), washer (Figure 8, Item 6), and nut (Figure 8, Item 7) on clamp
(Figure 8, Item 8).
Figure 8. Cylinder Caps and Clamp.
0309
