TM 5-3805-293-23-5
0282
REMOVAL CONTINUED
2. Remove five screws (Figure 2, Item 1), washers (Figure 2, Item 2), and inner panel cover (Figure 2, Item 3)
from joystick support (Figure 2, Item 4).
C AU T I O N
The joystick support mount is spring-loaded. By rotating the joystick support 90 degrees
from center, the locking bung is disengaged and the support will be forced out of the
mount tube. Maintain slight downward pressure on the joystick support until it is ready to
be removed.
3. Rotate joystick support (Figure 2, Item 4) inboard.
Figure 2. Inner Panel Cover.
0282