TM 5-3805-293-23-4
0245
REMOVAL CONTINUED
000245
5. Remove four locknuts (Figure 3, Item 4) and washers (Figure 3, Item 3) from line support brackets (Figure 3,
Item 5). Discard locknuts.
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
C AU T I O N
Cap all open lines and fittings to prevent dirt from entering system and to prevent leakage.
Keep all parts clean from contaminants. Contaminants may cause rapid wear and
shortened component life.
6. Disconnect AWD line (Figure 3, Item 2) from AWD tube (Figure 3, Item 1).
Figure 3. AWD Line and Line Brackets (Serial Number Prefix RMY).
0245
Change 1