TM 5-3805-293-23-4
0244
INSPECTION
000244
1. Inspect sensor electrical connector (Figure 2, Item 5) for damage.
2. Inspect sensor insulation and wires (Figure 2, Item 1) for damage.
3. Inspect sensor housing (Figure 2, Item 2) and threads (Figure 2, Item 3) for damage.
4. Inspect sensor probe (Figure 2, Item 4) for damage.
Figure 2. Sensor Inspection.
0244
END OF TASK
INSTALLATION
000244
N OT E
Install wires as noted during removal.
Install tee fitting as noted during removal.
1. Install new O-ring (Figure 1, Item 6) and tee fitting (Figure 1, Item 7) on steering tube (Figure 1, Item 5).
2. Install new O-ring (Figure 1, Item 8) and connect steering hose (Figure 1, Item 9) to tee fitting (Figure 1,
Item 7).
3. Install new O-ring (Figure 1, Item 4), fitting (Figure 1, Item 3), new O-ring (Figure 1, Item 2) and steering oil
temperature sensor (Figure 1, Item 1) on tee fitting (Figure 1, Item 7).
4. Connect electrical connector (Figure 1, Item 11) to front attachment wiring harness (Figure 1, Item 10).
END OF TASK