TM 5-3805-293-23-4
0215
INSTALLATION CONTINUED
4. Install wiring harness (Figure 10, Item 4), two clamps (Figure 10, Item 7), washers (Figure 10, Item 6), and
bolts (Figure 10, Item 5) on filter bracket (Figure 10, Item 17).
5. Install three chassis grounds (Figure 10, Item 13), washers (Figure 10, Item 11), and bolts (Figure 10, Item 12)
on filter bracket (Figure 10, Item 17).
6. Install two new O-rings (Figure 10, Item 9) and connect AWD hoses (Figure 10, Item 8) to fittings (Figure 10,
Item 10).
7. Install new O-ring (Figure 10, Item 15) and connect implement and steering pump hose (Figure 10, Item 16) to
fitting (Figure 10, Item 14).
8. Install two new O-rings (Figure 10, Item 2) and connect AWD hoses (Figure 10, Item 1) to fittings (Figure 10,
Item 3).
9. Install new O-ring (Figure 10, Item 19) and connect implement and steering pump hose (Figure 10, Item 20) to
fitting (Figure 10, Item 18).
Figure 10. Filter Hoses.
0215
END OF TASK
FOLLOW-ON TASKS
000215
Install cooling module (WP 0049).
END OF TASK
END OF WORK PACKAGE