TM 5-3805-293-23-4
0215
DISASSEMBLY CONTINUED
000215
5. Remove fitting (Figure 5, Item 11), O-ring (Figure 5, Item 12), fitting (Figure 5, Item 13) and O-ring (Figure 5,
Item 10) from implement and steering oil filter base (Figure 5, Item 15). Discard O-rings.
6. Remove fitting (Figure 5, Item 4) and O-ring (Figure 5, Item 5) from implement and steering oil filter base
(Figure 5, Item 15). Discard O-ring.
7. Remove implement and steering oil filter (Figure 5, Item 14) from implement and steering oil filter base
(Figure 5, Item 15). Discard filter.
8. Remove three bolts (Figure 5, Item 3), washers (Figure 5, Item 2) and implement and steering oil filter base
(Figure 5, Item 15) from filter bracket (Figure 5, Item 1).
9. Remove pressure switch (Figure 5, Item 7) and O-ring (Figure 5, Item 6) from implement and steering oil filter
base (Figure 5, Item 15). Discard O-ring.
10. Remove pressure test port (Figure 5, Item 8) and O-ring (Figure 5, Item 9) from implement and steering oil filter
base (Figure 5, Item 15). Discard O-ring.
Figure 5. Implement and Steering Filter Base.
0215
END OF TASK
CLEANING AND INSPECTION
000215
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK