TM 5-3805-293-23-4
0215
ASSEMBLY
000215
Figure 6. Filter Bases and Bracket.
0215
1. Install new O-ring (Figure 7, Item 9) and pressure test port (Figure 7, Item 8) on implement and steering oil
filter base (Figure 7, Item 15).
2. Install new O-ring (Figure 7, Item 6) and pressure switch (Figure 7, Item 7) on implement and steering oil filter
base (Figure 7, Item 15).
3. Install implement and steering oil filter base (Figure 7, Item 15), three washers (Figure 7, Item 2) and bolts
(Figure 7, Item 3) on filter bracket (Figure 7, Item 1).
4. Apply a thin coat of clean oil to seal of new implement and steering oil filter.
5. Install implement and steering oil filter element (Figure 7, Item 14) by hand until the seal contacts implement
and steering oil filter base (Figure 7, Item 15).
6. Tighten implement and steering oil filter element (Figure 7, Item 14) an additional 3/4 turn.
7. Install new O-ring (Figure 7, Item 5) and fitting (Figure 7, Item 4) on implement and steering oil filter base
(Figure 7, Item 15).
8. Install new O-ring (Figure 7, Item 10), fitting (Figure 7, Item 13), new O-ring (Figure 7, Item 12), and fitting
(Figure 7, Item 11) on implement and steering oil filter base (Figure 7, Item 15).
Figure 7. Implement and Steering Filter Base.
0215