TM 5-3805-293-23-4
0215
ASSEMBLY CONTINUED
000215
N OT E
Perform steps 9 through 14 to assemble one AWD oil filter base. Repeat steps to
assemble second AWD oil filter base.
9. Install new O-ring (Figure 10, Item 4) and pressure switch (Figure 8, Item 5) on AWD oil filter base (Figure 8,
Item 8).
10. Install AWD oil filter base (Figure 8, Item 8), two washers (Figure 8, Item 2) and bolts (Figure 8, Item 3) on filter
bracket (Figure 8, Item 6).
11. Apply a thin coat of clean oil to seal of new AWD oil filter.
12. Install AWD oil filter element (Figure 8, Item 7) by hand until the seal contacts AWD oil filter base (Figure 8,
Item 8).
13. Tighten AWD oil filter element (Figure 8, Item 7) an additional 3/4 turn.
14. Install two new O-rings (Figure 8, Item 9) and fittings (Figure 8, Item 1) on AWD oil filter base (Figure 8,
Item 8).
Figure 8. AWD Filter Base.
0215
END OF TASK