TM 5-3805-293-23-4
0215
REMOVAL
000215
N OT E
Tag and mark all hoses and fittings to aid in installation.
Tag and mark all electrical connectors and wires to aid in installation.
Use suitable container to catch excess oil when disconnecting lines.
1. Disconnect implement and steering pump hose (Figure 1, Item 20) and remove O-ring (Figure 1, Item 19) from
fitting (Figure 1, Item 18). Discard O-ring.
2. Disconnect two AWD hoses (Figure 1, Item 1) and remove O-rings (Figure 1, Item 2) from fittings (Figure 1,
Item 3). Discard O-rings.
3. Disconnect implement and steering pump hose (Figure 1, Item 16) and remove O-ring (Figure 1, Item 15) from
fitting (Figure 1, Item 14). Discard O-ring.
4. Disconnect two AWD hoses (Figure 1, Item 8) and remove O-rings (Figure 1, Item 9) from fittings (Figure 1,
Item 10). Discard O-rings.
5. Remove three bolts (Figure 1, Item 12), washers (Figure 1, Item 11), and chassis grounds (Figure 1, Item 13)
from filter bracket (Figure 1, Item 17).
6. Remove two bolts (Figure 1, Item 5), washers (Figure 1, Item 6), clamps (Figure 1, Item 7) and wiring harness
(Figure 1, Item 4) from filter bracket (Figure 1, Item 17).
Figure 1. Filter Hoses.
0215