TM 5-3805-293-23-4
0214
REMOVAL
000214
1. Clean area around the filter (Figure 1, Item 1).
2. Remove oil filter element (Figure 1, Item 1) from machine.
0214
END OF TASK
CLEANING AND INSPECTION
000214
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000214
1. Apply a thin coat of clean oil to seal of new filter.
2. Install oil filter element (Figure 1, Item 1) by hand until the seal contacts oil filter base.
3. Tighten oil filter element (Figure 1, Item 1) an additional 3/4 turn.
END OF TASK
FOLLOW-ON TASKS
000214
1. Remove vacuum cap (WP 0221).
2. Check hydraulic oil level (WP 0047).
END OF TASK
END OF WORK PACKAGE