TM 5-3805-293-23-4
0213
REMOVAL
000213
N OT E
Clean area around the filters. This must be done before the filters can be removed.
Remove oil filter elements (Figure 1, Items 1 and 2) from machine.
0213
END OF TASK
CLEANING AND INSPECTION
000213
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000213
1. Apply a thin coat of clean oil to seal of new filter.
2. Install oil filter elements (Figure 1, Items 1 and 2) by hand until the seal contacts oil filter base.
3. Tighten oil filter elements (Figure 1, Items 1 and 2) an additional 3/4 turn.
END OF TASK
FOLLOW-ON TASKS
000213
1. Remove vacuum cap (WP 0221).
2. Check hydraulic oil level (WP 0047).
END OF TASK
END OF WORK PACKAGE