TM 5-3805-293-23-4
0170
INSTALLATION
000170
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Failure to follow this warning may cause injury or death to
personnel.
N OT E
Wheel lean cylinder weighs 50 lb (23 kg).
If wheel is removed, use a lifting device toalign wheel lean arm, tilt cylinder and wheel
lean cylinder.
1. With assistance, install wheel lean cylinder (Figure 7, Item 7) on machine.
2. Install two caps (Figure 7, Item 11), four washers (Figure 7, Item 9), and bolts (Figure 7, Item 10) on wheel
lean cylinder (Figure 7, Item 7).
3. Install two new O-rings (Figure 7, Items 8 and 12) and fittings (Figure 7, Items 1 and 6) on wheel lean cylinder
(Figure 7, Item 7).
4. Install new O-ring (Figure 7, Item 5) and connect wheel lean cylinder hydraulic hose (Figure 7, Item 4) to
wheel lean cylinder (Figure 7, Item 7).
5. Install new O-ring (Figure 7, Item 2) and connect wheel lean cylinder hydraulic hose (Figure 7, Item 3) to
wheel lean cylinder (Figure 7, Item 7).
Figure 7. Wheel Lean Cylinder Hydraulic Hose and Cap.
0170