TM 5-3805-293-23-4
0170
REMOVAL
000170
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury.
N OT E
Tag and mark hoses to aid in installation.
1. Install wheel lean lock bolt (Figure 1, Item 3) and nut (Figure 1, Item 1) on front axle (Figure 1, Item 2) on left
side of machine. Hand tighten only.
2. Relieve wheel lean circuit hydraulic system pressure (WP 0218).
Figure 1. Wheel Lean Lock Bolt.
0170