TM 5-3805-293-23-4
0170
DISASSEMBLY
000170
1. Remove head (Figure 5, Item 4) and cylinder rod (Figure 5, Item 8) from cylinder housing (Figure 5, Item 15).
2. Remove bolt (Figure 5, Item 14) and washer (Figure 5, Item 12) from cylinder rod (Figure 5, Item 8).
3. Remove piston (Figure 5, Item 11) and head (Figure 5, Item 4) from cylinder rod (Figure 5, Item 8).
4. Remove seal (Figure 5, Item 13), wear ring (Figure 5, Item 10) and seal (Figure 5, Item 9) from piston (Figure
5, Item 11). Discard seal, wear ring, and seal.
5. Remove wiper seal (Figure 5, Item 7), seal (Figure 5, Item 6) and seal (Figure 5, Item 5) from head (Figure 5,
Item 4). Discard two seals and wiper seal.
6. Remove wear ring (Figure 5, Item 1), seal (Figure 5, Item 2) and O-ring (Figure 5, Item 3) from head (Figure 5,
Item 4). Discard wear ring seal and O-ring.
Figure 5. Wheel Lean Cylinder.
0170
END OF TASK
CLEANING AND INSPECTION
000170
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK