TM 5-3805-293-23-4
0170
ASSEMBLY
000170
1. Install new O-ring (Figure 6, Item 3), new seal (Figure 6, Item 2), and new wear ring (Figure 6, Item 1) on head
(Figure 6, Item 4).
2. Install new seal (Figure 6, Item 5), new seal (Figure 6, Item 6) and new wiper seal (Figure 6, Item 7) on head
(Figure 6, Item 4).
3. Install new seal (Figure 6, Item 9), new wear ring (Figure 6, Item 10), and new seal (Figure 6, Item 13) on pis-
ton (Figure 6, Item 11).
4. Install head (Figure 6, Item 4) and piston (Figure 6, Item 11) on cylinder rod (Figure 6, Item 8).
5. Install washer (Figure 6, Item 12) and bolt (Figure 6, Item 14) on cylinder rod (Figure 6, Item 8). Torque to
1,325 lb-ft (1,800 Nm).
6. Install cylinder rod (Figure 6, Item 8) and head (Figure 6, Item 4) on cylinder housing (Figure 6, Item 15).
Figure 6. Wheel Lean Cylinder.
0170
END OF TASK