TM 5-3805-293-23-3
0121
INSTALLATION
000121
N OT E
Apply a light coat of O-ring assembly compound to all O-rings prior to installation.
1. Install new O-ring (Figure 2, Item 2) and tee fitting (Figure 2, Item 3) on implement and steering pump control
valve (Figure 2, Item 8).
2. Install three new O-rings (Figure 2, Item 7), implement and steering pump control valve (Figure 2, Item 8) and
four bolts (Figure 2, Item 6) on implement and steering pump (Figure 2, Item 1).
3. Install new O-ring (Figure 2, Item 4) and connect hydraulic hose (Figure 2, Item 5) to tee fitting (Figure 2,
Item 3).
4. Install panel (Figure 3, Item 4), four washers (Figure 3, Item 5), and bolts (Figure 3, Item 6) on machine.
5. Install rod (Figure 3, Item 1), washer (Figure 3, Item 3), and new cotter pin (Figure 3, Item 2) on panel
(Figure 3, Item 4).
Figure 3. Enclosure Panel.
0121
END OF TASK
FOLLOW-ON TASKS
000121
Remove vacuum cap (WP 0221).
END OF TASK
END OF WORK PACKAGE