TM 5-3805-293-23-3
0121
REMOVAL CONTINUED
3. Disconnect hydraulic hose (Figure 2, Item 5) and remove O-ring (Figure 2, Item 4) from tee fitting (Figure 2,
Item 3). Discard O-ring.
4. Remove four bolts (Figure 2, Item 6), implement and steering pump control valve (Figure 2, Item 8) and three
O-rings (Figure 2, Item 7) from implement and steering pump (Figure 2, Item 1). Discard O-rings.
5. Remove tee fitting (Figure 2, Item 3) and O-ring (Figure 2, Item 2) from implement and steering pump control
valve (Figure 2, Item 8). Discard O-ring.
Figure 2. Implement and Steering Pump Control Valve.
0121
END OF TASK
CLEANING AND INSPECTION
000121
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
