TM 5-3805-293-23-3
0114
DISASSEMBLY CONTINUED
7. Remove fitting assembly (Figure 15, Item 1) from cylinder head (Figure 15, Item 2). Discard fitting assembly.
8. Remove fitting (Figure 15, Item 3) and sealing washer (Figure 15, Item 4) from cylinder head (Figure 15,
Item 2). Discard sealing washer.
Figure 15. Cylinder Head Pipe Fittings.
0114
END OF TASK
CLEANING AND INSPECTION
000114
1. Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
2. Inspect cylinder head (WP 0032).
END OF TASK
ASSEMBLY
000114
1. Install new sealing washer (Figure 15, Item 4) and fitting (Figure 15, Item 3) on cylinder head (Figure 15,
Item 2).
2. Install new fitting assembly (Figure 15, Item 1) on cylinder head (Figure 15, Item 2).