TM 5-3805-293-23-3
0103
REMOVAL CONTINUED
Valve Mechanism Cover Base
000103
1. Remove fuel injector wiring harness. Refer to procedure in this work package.
2. Remove 14 valve mechanism cover base bolts (Figure 3, Item 1) from valve mechanism cover base (Figure 3,
Item 2) in sequence shown (Figure 4).
3. Remove valve mechanism cover base (Figure 3, Item 2) and gasket (Figure 3, Item 3) from cylinder head. Dis-
card gasket.
Figure 3. Valve Mechanism Cover Base.
0103
Figure 4. Valve Mechanism Cover Base Bolt Removal Sequence.
0103
END OF TASK
CLEANING AND INSPECTION
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
Change 1