TM 5-3805-293-23-3
0104
REMOVAL
000104
N OT E
Tag and mark wires to aid in installation.
1. Slide lock tab (Figure 1, Item 3) back, and press down and disconnect electrical connector (Figure 1, Item 6)
from engine oil pressure sensor (Figure 1, Item 4).
2. Remove two bolts (Figure 1, Item 1) and bracket (Figure 1, Item 2) from engine (Figure 1, Item 7). Position
bracket and electrical connector aside.
3. Remove engine oil pressure sensor (Figure 1, Item 4) and O-ring (Figure 1, Item 5) from engine (Figure 1,
Item 7). Discard O-ring.
Figure 1. Pressure Sensor.
0104
END OF TASK
CLEANING AND INSPECTION
000104
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK