TM 5-3805-293-23-3
0103
REMOVAL CONTINUED
Fuel Injector Wiring Harness
000103
N OT E
Tag and mark wires to aid in installation.
1. Remove valve cover. Refer to procedure in this work package.
2. Remove 12 nuts and harness connections (Figure 2, Item 2) from six fuel injectors (Figure 2, Item 1).
3. Disconnect three fuel wiring harness plugs (Figure 2, Item 7) from three fuel injector harness connectors
(Figure 2, Item 4).
4. Remove three clips (Figure 2, Item 3) from valve cover base (Figure 2, Item 6). Discard clips.
5. Remove three snaprings (Figure 2, Item 5) and push fuel injector harness connectors (Figure 2, Item 4) and O-
rings (Figure 2, Item 8) inward to remove from valve cover base (Figure 2, Item 6). Discard O-rings.
6. Remove six sleeves (Figure 2, Item 9) from valve cover base (Figure 2, Item 6).
Figure 2. Fuel Injector Harness Replacement.
0103
Change 1
