TM 5-3805-293-23-2
0032
FLYWHEEL, FLYWHEEL HOUSING AND GEAR GROUP INSPECT CONTINUED
10. With assistance, rotate engine (refer to Manually Turning Engine this work package).
11. Note reading on dial indicator every 45 degrees.
a. Calculate difference between lowest measurement and highest measurement.
b. Difference must not be greater than limit given in Table 2. If readings are greater than limits in Table 2,
replace flywheel housing (WP 0101).
12. Remove two bolts (Figure 29, Item 2) and washers (Figure 29, Item 3) from flywheel (Figure 29, Item 1).
Figure 29. Flywheel Replacement.
032
0032-30