TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2252-04 Machine Articula-
2252-04 Was Active for the
tion Angle Sensor #2 Volt-
Transmission ECM and the
age Below Normal -
Implement 1 ECM - Replace
Continued
transmission ECM (WP 0137) and
implement 1 ECM (WP 0268).
Connect secondary steering harness
connector AT-C4 (WP 0009, Figure
122) to articulation angle position
sensor 2 (right) (WP 0009, Figure
123) (WP 0257).
Connect rear chassis harness
connector FA-C5 (WP 0009, Figure
111) to secondary steering wiring
harness AT-C1 (WP 0009, Figure 110)
(WP 0186).
Proceed to step 3.
3. Using MSD (WP 0006), select
2252-04 Code Active - Repeat
Implement 120M and verify 2252- troubleshooting from the beginning of
04 is active.
this diagnostic code.
2252-04 Code Not Active -
Troubleshooting complete.
Test Step 6. Check for Shorted Rear
Chassis Wiring Harness.
1. Disconnect rear chassis harness
connector FA-C22 (WP 0009,
Figure 47) from cab lower wiring
harness P-C69 (WP 0009, Figure
46) (WP 0188).
0031-143