TM 5-3805-293-23-2
0030
Table 1. Implement Code (2169-03 to 2182-13) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2173-06 Wheel Lean Left
3. Using MSD (WP 0006), select
2173-06 Code Active - Repeat
Solenoid Current Above
implement 120M ECM and verify
troubleshooting code from the
Normal - Continued
2173-06 is not active.
beginning.
2173-06 Code Not Active -
Troubleshooting complete.
2173-13 Wheel Lean Left
System Response:
Solenoid Out of Calibration
ECM will log diagnostic code.
N OT E
Always inspect the harness connectorsthat are involved in the circuit.
Poor connections can often be the cause of a problem in an electrical
circuit. Verify that all connections in the circuit are clean and secure,
and that all connections are in good condition. If a problem with a con-
nection is found, correct the problem and verify that this diagnostic code
is active before performing this procedure.
Perform open or short circuit test ateach harness connection to identify
correct harness to replace.
Perform this test only if condition is active.
Test Step 1. Test for Active Code.
1. Using MSD (WP 0006), select
2173-13 Code Active - Proceed to
implement 120M and verify 2173-
Test Step 2.
13 is active.
2173-13 Code Not Active -
Troubleshooting complete.
Test Step 2. Verify Other Diagnostic
Codes are Not Active.
1. Using MSD (WP 0006) verify
2173-03, 2173 05, or 2173-06 Code
Active - Troubleshoot other
2173-03, 2173-05, or 2173-06 are
diagnostic codes first in this work
not active.
package.
2173-13 Code Only Active - Proceed
to step 2.
2. Calibrate wheel Lean left sole-
Wheel Lean Left Solenoid Cannot
noid, refer to Any Implement
Be Calibrated - Replace wheel lean
Moves with Joystick in Hold Posi-
left solenoid (WP 0245).
tion (WP 0025).
Proceed to step 3.
Wheel Lean Left Solenoid
Calibrated - Proceed to step 3.
2173-13 Code Active - Repeat
3. Using MSD (WP 0006), select
troubleshooting code from the
implement 120M ECM and verify
beginning.
2173-13 is active.
2173-13 Code Not Active -
Troubleshooting complete.
0030-40
