TM 5-3805-293-23-2
0030
Table 1. Implement Code (2169-03 to 2182-13) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2174-03 Wheel Lean Right
5. Using MSD (WP 0006), select
2174-03 Code Active - Repeat
Solenoid Voltage Above Nor-
implement 120M ECM and verify
troubleshooting code from the
mal - Continued
2174-03 is not active.
beginning.
2174-03 Code Not Active -
Troubleshooting complete.
Test Step 3. Test for Shorted Front
Attachment Wiring Harness.
1. Disconnect front attachment wir-
ing harness connector U-C1 (WP
0009, Figure 121) from cab lower
wiring harness connector P-C50
(WP 0009, Figure 120) (WP
0180).
2. Using a digital multimeter, mea-
Continuity - Replace front
sure for continuity between front
attachment wiring harness (WP
attachment wiring harness con-
0180).
nector U-C1 (WP 0009, Figure
Connect cab lower wiring harness
121) terminal 10 and all other U-
connector P-C41 (WP 0009, Figure
C1 terminals. There should be no
68) to implement 1 ECM J1 (WP
continuity.
0009, Figure 69) (WP 0268).
Proceed to step 3.
No Continuity - Replace cab lower
wiring harness (WP 0266).
Connect front attachment wiring
harness connector U-C19 (WP 0009,
Figure 230) to wheel lean right
solenoid (WP 0009, Figure 231) (WP
0180).
Proceed to step 3.
3. Using MSD (WP 0006), select
2174-03 Code Active - Repeat
implement 120M ECM and verify
troubleshooting code from the
2174-03 is not active.
beginning.
2174-03 Code Not Active -
Troubleshooting complete.
0030-42
