TM 5-3805-293-23-2
0030
Table 1. Implement Code (2169-03 to 2182-13) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2173-06 Wheel Lean Left
2. Disconnect cab lower wiring har-
Solenoid Current Above
ness connector P-C41 (WP 0009,
Normal - Continued
Figure 68) from implement 1 ECM
J1 (WP 0009, Figure 69) (WP
0268).
3. Using a digital multimeter, mea-
Continuity - Proceed to Test Step 4.
sure for continuity between cab
No Continuity - Replace implement 1
lower wiring harness connector P-
ECM (WP 0268).
C41 (WP 0009, Figure 68) termi-
Connect front attachment wiring
nal 67 and terminal 55. There
harness connector U-C18 (WP 0009,
should be no continuity.
Figure 228) to wheel lean left solenoid
(WP 0009, Figure 229) (WP 0180).
Proceed to step 4.
4. Using MSD (WP 0006), select
2173-06 Code Active - Repeat
implement 120M ECM and verify
troubleshooting code from the
2173-06 is not active.
beginning.
2173-06 Code Not Active -
Troubleshooting complete.
Test Step 4. Test for Shorted Front
Attachment Wiring Harness.
1. Disconnect front attachment wir-
ing harness connector U-C1 (WP
0009, Figure 121) from cab lower
wiring harness connector P-C50
(WP 0009, Figure 120) (WP
0180).
2. Using a digital multimeter, mea-
Continuity - Replace front
sure for continuity between front
attachment wiring harness (WP
attachment wiring harness con-
0180).
nector U-C1 (WP 0009, Figure
Connect cab lower wiring harness
121) terminal 9 and terminal 37.
connector P-C41 (WP 0009, Figure
There should be no continuity.
68) to implement 1 ECM J1 (WP
0009, Figure 69) (WP 0268).
Proceed to step 3.
No Continuity - Replace cab lower
wiring harness (WP 0266).
Connect front attachment wiring
harness connector U-C18 (WP 0009,
Figure 228) to wheel lean left solenoid
(WP 0009, Figure 229) (WP 0180).
Proceed to step 3.
0030-39
