TM 5-3805-293-23-2
0027
Table 1. Implement Code (0615-02 TO 2113-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1473-02 Steering Control
4. Using the MSD (WP 0006), select
1473-02 Code Active - Repeat
Position Sensor #3 Data
Implement 120M and verify 1473-
troubleshooting code from the
Erratic, Intermittent or Incor-
02 is not active.
beginning.
rect - Continued
1473-02 Code Not Active -
Troubleshooting complete.
Test Step 5. Test for Shorted Rear
Chassis Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect the rear chassis wir-
ing harness connector FA-C21
(WP 0009, Figure 124) from
transmission ECM J2 (WP 0009,
Figure 112).
3. Disconnect the cab lower wiring
harness connector P-C39 (WP
0009, Figure 70) from implement
ECM J-2 (WP 0009, Figure 71)
(WP 0268).
4. Using digital multimeter, test for
Continuity - Proceed to Test Step 6.
continuity between rear chassis
No Continuity and 1473-02 Code
wiring harness connector FA-C21
Present on Trans/Chassis ECM and
(WP 0009, Figure 124) terminal
Implement ECM - Proceed to Test
34, and all other terminals, and
Step 7.
machine ground.
No Continuity and 1473-02 Code
There should be no continuity.
Present on Trans/Chassis ECM
Only - Transmission ECM faulty,
replace transmission ECM (WP
0137).
Connect the cab lower wiring harness
connector P-C39 (WP 0009, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C48 (WP 0009, Figure
116) to LH joystick connector J-3 (WP
0009, Figure 117) (WP 0282).
Proceed to step 5.
5. Using the MSD (WP 0006), select 1473-02 Code Active - Repeat
Implement 120M and verify 1473- troubleshooting code from the
02 is not active.
beginning.
1473-02 Code Not Active -
Troubleshooting complete.
0027-98
