TM 5-3805-293-23-2
0026
Table 1. Implement Code (0041-03 to 0600-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0600-04 Main Hydraulic
3. Using digital multimeter, measure
Continuity - Replace rear chassis
Pump Discharge Pressure
for resistance between rear chas-
wiring harness (WP 0188).
Sensor Voltage Below
sis wiring harness connector FA-
Connect the cab lower wiring harness
Normal - Continued
C23 (WP 0009, Figure 17) termi-
connector P-C41 (WP 0009, Figure
nal 3 and FA-C22 terminal 25.
68) to implement ECM J1 (WP 0009,
There should be no continuity.
Figure 69) (WP 0268).
Proceed to step 4.
No Continuity - Replace cab lower
wiring harness (WP 0266).
Connect the rear chassis wiring
harness connector FA-C6 (WP 0009,
Figure 212) to hydraulic oil
temperature sensor (WP 0059).
Proceed to step 4.
4. Using the MSD (WP 0006), select 0600-04 Code Active - Repeat
Implement 120M and verify 0600- troubleshooting code from the
04 is not active.
beginning.
0600-04 Code Not Active -
Troubleshooting complete.
END OF WORK PACKAGE
0026-94