TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2175-06 Secondary Steer
Test Step 3. Test for Shorted Front
Attachment Wiring Harness.
Normal - Continued
1. Disconnect the front attachment
wiring harness connector U-C36
(WP 0009, Figure 188) from cab
lower wiring harness connector P-
C151 (WP 0009, Figure 189).
continuity between front attach-
harness is shorted, replace front
ment wiring harness connector U-
attachment wiring harness (WP
C36 (WP 0009, Figure 188) termi-
0180).
nal 3 and machine ground. There
Connect the rear chassis wiring har-
should be no continuity.
ness connector FA-C22 (WP 0009,
Figure 47) to cab lower wiring harness
connector P-C69 (WP 0009, Figure
46) (WP 0266).
Connect the rear chassis wiring har-
ness connector FA-C20 (WP 0009,
Figure 113) to transmission ECM J1
(WP 0009, Figure 112).
Proceed to step 3.
ness is shorted, replace cab lower wir-
ing harness (WP 0266).
Connect the rear chassis wiring har-
ness connector FA-C20 (WP 0009,
Figure 113) to transmission ECM J1
(WP 0009, Figure 112).
Connect the front attachment wiring
harness connector U-C39 (WP 0009,
Figure 186) to secondary steering left
0216).
Proceed to step 3.
3. Using the MSD (WP 0006), select
2175-06 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2175-06 is not active.
2175-06 Code Not Active - Trouble-
shooting complete.
0020-20