TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2175-06 Secondary Steer
5. Using digital multimeter, test for
Continuity - Proceed to Test Step 2.
Left Solenoid Current Above
continuity between rear chassis
No Continuity - Transmission ECM
Normal - Continued
wiring harness connector FA-C20
faulty, replace transmission ECM (WP
(WP 0009, Figure 113) terminal
0137).
67 and machine ground. There
Connect the front attachment wiring
should be no continuity.
harness connector U-C39 (WP 0009,
Figure 186) to secondary steering left
solenoid (WP 0009, Figure 187) (WP
0216).
Proceed to step 6.
6. Using the MSD (WP 0006), select
2175-06 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2175-06 is not active.
2175-06 Code Not Active - Trouble-
shooting complete.
Test Step 2. Test for Shorted Cab
Lower Wiring Harness.
1. Disconnect the rear chassis
wiring harness connector FA-C22
(WP 0009, Figure 47) from cab
lower wiring harness connector P-
C69 (WP 0009, Figure 46) (WP
0266).
2. Using digital multimeter, test for
Continuity - Proceed to Test Step 3.
continuity between cab lower wir-
No Continuity - Rear chassis wiring
ing harness connector P-C69
harness is shorted, replace rear chas-
(WP 0009, Figure 46) terminal 13
sis wiring harness (WP 0188).
and machine ground. There
Connect the front attachment wiring
should be no continuity.
harness connector U-C39 (WP 0009,
Figure 186) to secondary steering left
solenoid (WP 0009, Figure 187) (WP
0216).
Proceed to step 3.
3. Using the MSD (WP 0006), select
2175-06 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2175-06 is not active.
2175-06 Code Not Active - Trouble-
shooting complete.
0020-19