TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2175-05 Secondary Steer
Test Step 3. Test for Open Cab
Left Solenoid Current Below
Lower Wiring Harness.
Normal - Continued
1. Disconnect the rear chassis
wiring harness connector FA-C22
(WP 0009, Figure 47) from cab
lower wiring harness connector P-
C69 (WP 0009, Figure 46) (WP
0266).
2. Using digital multimeter, test for
Resistance Less Than 5.0 Ohms -
resistance between cab lower wir-
Rear chassis wiring harness is open,
ing harness connector P-C69
replace rear chassis wiring harness
(WP 0009, Figure 46) terminal 13
(WP 0188).
and terminal 18. Resistance
Remove jumper wire from front
should be less than 5.0 Ohms.
attachment wiring harness connector
U-C39 (WP 0009, Figure 186) termi-
nal 1 and terminal 2.
Connect the front attachment wiring
harness connector U-C39 (WP 0009,
Figure 186) to secondary steering left
solenoid (WP 0009, Figure 187) (WP
0216).
Proceed to step 3.
Resistance 5.0 Ohms or Greater -
Proceed to Test Step 4.
3. Using the MSD (WP 0006), select
2175-05 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2175-05 is not active.
2175-05 Code Not Active - Trouble-
shooting complete.
0020-16