TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0615-02 Machine Articula-
15. Verify 0615-02 was active for the
0615-02 Was Active for the Trans-
tion Angle Sensor Data
Transmission ECM or the Imple-
mission ECM Only - Replace trans-
Erratic, Intermittent or Incor-
ment 1 ECM.
mission ECM (WP 0137).
rect - Continued
Proceed to step 16.
0615-02 Was Active for the Imple-
ment 1 ECM Only - Replace imple-
ment 1 ECM (WP 0268).
Proceed to step 16.
0615-02 Was Active for the Trans-
mission ECM and the Implement 1
ECM - Replace transmission ECM
(WP 0137) and implement 1 ECM
(WP 0268).
Proceed to step 16.
16. Connect secondary steering har-
ness connector AT-C3 (WP 0009,
Figure 144) to left articulation
angle position sensor (WP 0009,
Figure 145) (WP 0257).
17. Connect rear chassis wiring har-
ness connector FA-C22 (WP
0009, Figure 47) to cab lower wir-
ing harness connector P-C69
(WP 0009, Figure 46), and install
rear bulkhead cover plate (WP
0266).
18. Connect cab lower wiring harness
connector P-C41 (WP 0009, Fig-
ure 68) to Implement 1 ECM J1
(WP 0009, Figure 69) (WP 0268).
0615-02 Code Active - Repeat trou-
19. Connect MSD (WP 0006). Select
bleshooting from the beginning of this
Trans/Chassis 120M and verify
diagnostic code.
0615-02 is active.
0615-02 Code Not Active - Trouble-
shooting complete.
0017-42