TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0517-04 All-Wheel Drive
4. Using a digital multimeter, test for
No Continuity - Proceed to Test Step
(AWD) Switch Voltage Below
continuity between P-C35 termi-
8.
Normal - Continued
nal 33 (WP 0009, Figure 53) and
Continuity - Replace cab lower wiring
all circuits in P-C27 (WP 0009,
harness (WP 0266).
Figure 74). There should be no
Connect R-C16 (WP 0009, Figure 66)
continuity.
on AWD mode switch connector (WP
0009, Figure 67) (WP 0275).
Proceed to step 5.
5. Using the MSD (WP 0006), select
0517-04 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
0517-04 is not active.
0517-04 Code Not Active - Trouble-
shooting complete.
Test Step 8. Test 823-GN Off Mode
Circuit for Short to Implement 1 Cir-
cuits in Cab Lower Wiring Harness.
1. Using a digital multimeter, test for
No Continuity - Proceed to step 2.
continuity between P-C35 termi-
Continuity - Replace cab lower wiring
nal 34 (WP 0009, Figure 53) and
harness (WP 0266).
all circuits in P-C41 (WP 0009,
Connect R-C16 (WP 0009, Figure 66)
Figure 68). There should be no
on AWD mode switch connector (WP
continuity.
0009, Figure 67) (WP 0275).
Proceed to step 3.
2. Using a digital multimeter, test for
No Continuity - Proceed to Test Step
continuity between P-C35 termi-
9.
nal 34 (WP 0009, Figure 53) and
Continuity on One or More Test
all circuits in P-C39 (WP 0009,
Points - Replace cab lower wiring
Figure 70). There should be no
harness (WP 0266).
continuity.
Connect R-C16 (WP 0009, Figure 66)
on AWD mode switch connector (WP
0009, Figure 67) (WP 0275).
Proceed to step 3.
3. Using the MSD (WP 0006), select
0517-04 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
0517-04 is not active.
0517-04 Code Not Active - Trouble-
shooting complete.
0013-32