TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0517-04 All-Wheel Drive
7. Using the MSD (WP 0006), select
0517-04 Code Active - Repeat trou-
(AWD) Switch Voltage Below
All Wheel Drive 120M and verify
bleshooting code from the beginning.
Normal - Continued
0517-04 is not active.
0517-04 Code Not Active - Trouble-
shooting complete.
Test Step 4. Test 823-GN Off Mode
Circuit for Short to Other AWD Cir-
cuits in Cab Lower Wiring Harness.
1. Using a digital multimeter, test for
No Continuity - Proceed to step 2.
continuity between P-C35 termi-
Continuity - Replace cab lower wiring
nal 34 and all other circuits in P-
harness (WP 0266).
C35 (WP 0009, Figure 53). There
Connect R-C16 (WP 0009, Figure 66)
should be no continuity.
on AWD mode switch connector (WP
0009, Figure 67) (WP 0275).
Proceed to step 4.
2. Using a digital multimeter, test for
No Continuity - Proceed to step 3.
continuity between P-C35 termi-
Continuity - Replace cab lower wiring
nal 34 (WP 0009, Figure 53) and
harness (WP 0266).
all circuits in P-C37 (WP 0009,
Connect R-C16 (WP 0009, Figure 66)
Figure 55). There should be no
on AWD mode switch connector (WP
continuity.
0009, Figure 67) (WP 0275).
Proceed to step 4.
3. Using a digital multimeter, test for
No Continuity - Proceed to Test Step
continuity between P-C35 termi-
5.
nal 34 (WP 0009, Figure 53) and
Continuity - Replace cab lower wiring
ground. There should be no conti-
harness (WP 0266).
nuity.
Connect R-C16 (WP 0009, Figure 66)
on AWD mode switch connector (WP
0009, Figure 67) (WP 0275).
Proceed to step 4.
4. Using the MSD (WP 0006), select
0517-04 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
0517-04 is not active.
0517-04 Code Not Active - Trouble-
shooting complete.
0013-29