TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0517-04 All-Wheel Drive
2. Turn ignition switch and battery
(AWD) Switch Voltage Below
disconnect switch to the OFF
Normal - Continued
position.
3. Disconnect cab upper wiring R-
C16 harness connector (WP
0009, Figure 66) from AWD mode
switch connector (WP 0009, Fig-
ure 67) (WP 0275).
4. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
5. Check for Active code 0517-04 or
Code 0517-04 Remains Active - Pro-
ceed to Test Step 2.
0517-03 in All Wheel Drive 120M
ECM (WP 0006).
Code 0517-04 Becomes Inactive
and Code 0517-03 Becomes Active
- Replace AWD mode switch (WP
0275).
Proceed to step 6.
6. Using the MSD (WP 0006), select
0517-04 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
0517-04 is not active.
0517-04 Code Not Active - Trouble-
shooting complete.
Test Step 2. Test for Shorted Cab
Upper Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect cab lower wiring har-
ness connector P-C3 (WP 0009,
Figure 34) from cab upper wiring
harness connector R-C1 (WP
0009, Figure 33) (WP 0266).
3. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
4. Check for Active code 0517-04 or
Code 0517-04 Remains Active - Pro-
0517-03 in All Wheel Drive 120M
ceed to Test Step 3.
ECM (WP 0006).
Code 0517-04 Becomes Inactive
and Code 0517-03 Becomes Active
- Replace cab upper wiring harness
(WP 0265).
Proceed to step 5.
0013-27
