POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
TRANSMISSION HYDRAULIC CONTROL VALVES
DISASSEMBLE TRANSMISSION HYDRAULIC
CONTROL VALVES
Tools Needed
A
B
C
lP1854
Pliers
1
lP1856
Pliers
1
FT1195
Pliers
1
NOTE: See DISASSEMBLE TRANSMISSION for
removal of transmission hydraulic control valves.
1. Remove bolts (1). Remove cover (3).
2. Remove the snap ring from the cover with
tool (A). Remove retainer (2). the spring
and poppet from the cover.
3. Remove bolts (6). Remove pilot valve (4).
4. Remove pin (5) with a hammer and punch.
5. Remove stop (7). Remove the O-ring seal
from the stop. Remove valve spool (8) from
the pilot valve body.
6. Remove detents (9) from the body.
7. Remove bolts (15). Remove directional con-
trol valve (10).
8. Remove bolts (11) and (14). Remove plates
(12) and (13) from the directional control
valve.
2-117
