TM 5-3805-2-6314&P-3
DISASSEMBLY AND ASSEMBLY
CAB WINDOW GLASS
REMOVE CAB WINDOW GLASS
Tools Needed
A
5H4845 Seal Installer
1
If it is necessary to remove broken glass, use thick
gloves to prevent injury.
1.
Put tool (A) in between the two lips of seal ( 1 ) as
shown. Move tool (A) along the seal to pull the
locking lip of the seal out away from the cab. Move
the tool completely around the circumference of the
window assembly.
2.
Remove the glass from the cab. Remove seal (2)
from the edge of the window opening.
INSTALL CAB WINDOW GLASS
Tools Needed
A
5H4845 Seal Installer
1
1.
Start along the side of the window panel opening to
install seal (1).
2.
Install edge (3) of seal over panel (2) with the
locking lip toward the outside of the cab.
3.
Install the seal around the circumference of the
window opening. Cut the seal to extend past the
starting point by .125 in. (3.18 mm) per foot of
window opening circumference. Push the ends of
the seal together and push them over the body
panel to make a tight, smooth joint.
NOTE: When the window assembly is installed, edge (5)
must be over window assembly (4) as shown.
4-90
