TM 5-3805-261-34
REAR AXLE MAINTENANCE. (cont)
14-17. Differential Assembly. (Sheet 12 of 12)
INSTALLATION (cont)
11. Tighten four nuts (1, Figure
14-136) to 260 to 300 ft-lb
torque.
12. Repeat steps 7 and 8.
13. Install two locks (5 and 4) and
bolts (3).
14. Install new lock wire through
four nuts (1) on each side of cap
(6).
NOTE
Return 130C Grader to
original equipment condition.
Figure 14-136.
End of Task
14-100
