TM 5-3805-261-34
REAR AXLE MAINTENANCE.
14-18. Differential Carrier. (Sheet 5 of 7)
INSPECTION
Inspect all parts. Refer to Chapter
2.
ASSEMBLY
1.
Install new gasket (30) and plug
(29) in carrier (31, Figure
14-142).
2.
Install new preformed packing
(28) and plug (27).
3.
Install four ferrules (26) and
studs (25, Figure 14-141).
4.
Install ten studs (24).
5.
Install two sleeves (23).
6.
Install plate (22), two locks
(21) and bolts (20) to carrier
(31).
7.
Install ring (19) and new seal
(18, Figure 14-140).
8.
Install new preformed packing
(17).
9.
Install cups (16 and 13) in
carrier (31). Lower temperature
of cups (16 and 13) before
installation.
10. Lubricate and install new seal
(14). Lip of new seal (14) must
be toward bevel gear.
Figure 14-142.
Figure 14-141.
Figure 1Figure 14-140.
Go to Sheet 6
14-105