TM 5-3805-261-34
REAR AXLE MAINTENANCE.
14-17. Differential Assembly. (Sheet 7 of 12)
DISASSEMBLY
22. Remove seal (44) and ring (45)
from differential carrier (46,
Figure 14-134).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
ASSEMBLY
1.
Install ring (45) and new seal
(44) in differential carrier (46,
Figure 14-134).
2.
Using clean engine oil SAE 30,
lubricate disc (42), eight discs
(41) and seven discs (40) and
install into housing (43, Figure
14-133).
3.
Install ring gear (39) on housing
(43).
4.
Install new seals (36 and 35) on
piston (37, Figure 14-132). New
seals (36 and 35) should be
installed so lips will be toward
bottom of bore when piston (37)
is installed.
Figure 14-134.
Figure 14-133.
Figure 14-132.
Go to Sheet 8
14-95