REAR AXLE MAINTENANCE. (cont.) - TM-5-3805-261-34

REAR AXLE MAINTENANCE. (cont.) - TM-5-3805-261-34_985

REAR AXLE MAINTENANCE. (cont.) - TM-5-3805-261-34_987

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
939

TM 5-3805-261-34 REAR AXLE MAINTENANCE. (cont) 14-17. Differential Assembly. (Sheet 10 of 12) ASSEMBLY (cont) 19. Install items 21 thru 18 as an assembly in housing (43, Figure 14-124). 20. Install gear (17). 21. Install washer (16). Notches in washer (16) must be alined with holes for two dowels (12) in upper surface of housing (15). 22. Position housing (15) so that four holes for dowels (12) aline with holes in legs of spider (21). 23. Install eight washers (14) and bolts (13). Tighten eight bolts (13) to 65 ft-lb torque. 24. Install six dowels (12) in housing (15). 25. Heat cone bearing (11) in engine oil SAE 30 to 275 degrees F and install. 26. Chill cup (9, Figure 14-123) in dry ice or low-humidity freezer and install in cage (10). 27. Install items 10 and 9 as an assembly and nut (8, Figure 14-122). Figure 14-124. Figure 14-122. Figure 14-123. Go to Sheet 11 14-98

Privacy Statement
Press Release
Contact